Teak and oily wood cleaner. It cleans all kinds of dirt in record time and removes dead wood, verdigris and mold from teak decks that have aged over time.
Teak Cleaner 1L
HOW TO USE:
Avoid prolonged exposure on painted surfaces, gel coat and varnished surfaces. Rinse any surface other than teak with plenty of water, paying special attention to the drainage points (rails, gunwale, etc.), do not allow the remains of dirt to dry by rinsing continuously with water, prolonged exposure to aluminum will cause it to become marked, to avoid this apply Vaseline on the aluminum.
VERY DIRTY TEAK:
Dilute Bestial teak cleaner in a bucket with water at a ratio of 5:1.
Wet the teak and remove puddles.
Covering an area of approximately 1m2, use a sponge or brush to spread the product.
Wait for the wood to turn a dark brown color and then rinse the area with plenty of water.
Use Bestial Teak Renovator to recover the tone of the teak, to create the effect of new wood.
TEAK WITH REGULAR MAINTENANCE:
Mix clean Teak Bestial in a ratio of 10:1 and follow steps 1 to 5.
Carry out a test in an inconspicuous area to verify that the product does not damage it.