content_copy

Teak Renovator 1L

Restores the original color of the teak, it is applied after cleaning the teak with TEAK CLEANER. It can also be used regularly to keep teak looking like new.

13.50

HOW TO USE:
Avoid prolonged exposure on painted surfaces, gel coat and varnished surfaces. Rinse with plenty of water on any surface that is not teak, paying special attention to the drainage points (rails, gunwale, etc.), do not allow the remains of dirt to dry by rinsing continuously with water, prolonged exposure to aluminum will cause it to is marked, to avoid this apply Vaseline on the aluminum.

VERY DIRTY TEAK:
Dilute Bestial Teak Renovator in a bucket with water at a ratio of 5:1.
Wet the teak and remove puddles.
Covering an area of approximately 1m2, use a sponge or brush to spread the product.
Wait 2 minutes for the wood to acquire a honey tone and then rinse the area with plenty of water.

CLEAN TEAK THAT NEEDS TO RECOVER THE COLOR:
Mix Bestial Teak Renovator at a ratio of 1:15 and follow steps 1-4.

NOTE:
Carry out a test in an inconspicuous area to verify that the product does not damage it.

You may also be interested in: